axial force的例句大全

In the end, a finite elements analysis is conducted in the condition of the arresting hook with the maximum axial force.

最后对拦阻钩在最大轴向作用力下作了有限元分析。

Effects of parameters on deforming force of tube inversion by axial drawing

条件参数对拉伸翻管成形力的影响规律

The connection between face shield and soil nailing determines the distribution of the axial force along length;

土钉和面层的连接方式决定着土钉长度方向上的轴力分布形态；

The whole structure, because of effect of the internal beam axial temperature force caused by axial restraint, its deformation is smaller than isolated joints, but its critical temperature is higher.

整体结构中，节点处受到梁轴向温度内力的作用，其相同温度下的变形及转角明显小于孤立节点。

The Solution to Node Displacement and Axial Forces of Two-force Rods of Planar and Concurrent Forces

超静定结构中求平面汇交二力杆系节点位移及轴力的方法

The results indicate that the bored pile works well and has high potential carrying capacity. Under the precondition of construction quality, we can shorten pile's length and reduce investment through the measurement of pile's axial force and pile's end resistance.

结果表明，黄土地区的钻孔灌注桩有较高的承载潜力和良好的工作性状，在保证施工质量的前提下，可借助桩身轴力传递和桩端阻力的量测，缩短桩长，节约投资。

Distribution of the force acting on pipe threads under the action of axial tension and its calculation

轴向拉力作用下管螺纹扣牙力分布及其计算

Study of the Inner Boundary Force of Axial Variable Cross Section Annulus Power Law Fluid

轴向变截面环空幂律流体内边界力的研究

Therefore, the bending moment may cause normal stress at the axis of gravity, and the concept of equivalent axial force is induced.

因此弯矩在形心处要引起正应力，从而引出所谓等效轴力的概念。

The thrust force ball bearing must axial perform in the work to give tightly.

推力球轴承在工作中必须加以轴向予紧.

The thrust force ball bearing must perform in the work axial pre-tight.

推力球轴承在工作中必须加以轴向预紧.

Moreover, a gear pair with curvilinear-tooth traces operates without axial thrust force.

除此之外, 具有曲线型齿线之齿轮在运转时亦不会产生轴向的推力.

By using finite element method and taking bolt material elastic-plasticity into consideration, the distribution laws of inner force and stresses in and deformation of a general triangle screwed bolt under the action of axial force were numerically calculated and analyzed.

采用有限元数值模拟方法，考虑螺栓材料的弹塑性性质，计算分析普通三角形螺纹螺栓&螺母副在轴向力作用下的内力、应力和变形规律。

The authors also discuss different affects of axial tension force and compression force on the critical external pressure.

对轴向拉力和压力对临界外压的不同影响也进行了讨论。

The variation laws of wearing character on V-packing are studied in the whole working life. The wearing character include the friction force, axial extrusion stress and axial pressure distribution.

对V形密封在整个工作寿命中，轴向挤压应力、轴向压力分布、摩擦力等特性变化进行实验研究。